Used PHiliphh Goldway UT4000F Multi-Parameter Patient Bedside Monitor
PHiliphh Goldway UT4000F Patient Monitor
About PHiliphh Goldway UT4000F Patient Monitor
The PHiliphh Goldway UT4000F patient monitor is a medical device used to monitor patients' vital signs and parameters in a healthcare setting.
Some of the key features of the UT4000F are:
- Display: It has a high-resolution color TFT display that displays multiple waveforms and numerical data at the same time. The screen size varies depending on the model.
- Parameters: It can measure a number of parameters including ECG, SpO2 (Oxygen Saturation), NIBP (Non-Invasive Blood Pressure), Respiratory Rate, Temperature and optionally Invasive Blood Pressure and cardiac output.
- Alarms: Offers customizable upper and lower alarm limits for each parameter. The monitor alerts healthcare providers when any vital signs exceed pre-set alarm limits.
- Battery: It has a built-in rechargeable battery that ensures uninterrupted monitoring even during power outages or patient transport.
- Data storage and connectivity: It has a built-in memory that can store patient data for up to 72 hours. Enables data transfer via USB or Ethernet to an electronic health record (EMR) system.
- Intuitive user interface: The monitor has an intuitive user interface with touch screen functions for easy navigation and setup.
- Portability: Relatively light and compact, suitable for bedside monitoring or ambulatory use.
Troubleshooting for PHiliphh Goldway UT4000F Patient Monitor
► when the instrument is turned on. There is no on-screen display and no indicator light.
Monitoring and analysis: If the instrument is connected to AC power without being turned on, the power light should be orange (or red); after switching on. The light should be green. Therefore:
(1) Check whether the mains socket and the two fuses on the back of the instrument are normal, that is, check whether there is AC input;
(2) Turn on the instrument and determine whether the switching power supply has a 15V DC output if there is a 220V AC input;
(3) If the instrument is turned on without AC power, the display will not appear and the indicator will not light. Indicates that the battery is low or damaged.
Solution:
(1) Connect all connecting parts reliably and make sure there is AC input;
(2) If your switching power supply does not have 15V output, you need to replace the switching power supply:
(3) Connect AC power to charge the instrument. If the battery is still low after 24 hours of charging, it means the battery is damaged and needs to be replaced.
► When the meter is turned on, the screen is blank. The light is always orange (or red).
Control and analysis: The light is orange. Indicates that the switching power supply has a 15V DC output:
(1) Turn on the instrument and use a multimeter to check whether the power switch is damaged;
(2) Check that the connection cable between the switch and the motherboard is not loose or damaged.
Solution:
(1) Replace the power switch;
(2) Connect the cable reliably; if it does not turn on, replace the motherboard.
► When the meter is turned on, there is no display on the screen, but the light is green.
Check and Analysis: If the button can start inflation at this time or you hear a heartbeat while measuring blood oxygen, it means the meter is turned on, but the TFT screen does not light up. Open the tool and check:
(1) There is an input voltage between 2.5V and 5.4V on the inverter power board or the connector is loose:
(2) Use a multimeter to check whether the inverter has high voltage output.
Solution:
(1) Connect the connection cable reliably and ensure the 2.5-5.4V output:
(2) If there is no high voltage output, replace the inverter.
► When the meter is turned on, the screen is blank. But there is a raster (commonly known as white screen) or the display colors are messed up.
Control and analysis: the TFT screen lights up. But the display part of the PC104 board is defective. The display signal cannot be output correctly
Solution: replace the PC104 board.
Specification of PHiliphh Goldway UT4000F Patient Monitor
| Product Name | PHiliphh Goldway UT4000F Patient Monitor |
| Brand | PHiliphh Goldway |
| Model no | UT4000F |
| Condition | Used |
| Power supply | AC 22V±22V 50Hz |
| Parameter | SPO2 ,ECG ,TEMP,NIBP |
| MOQ | One piece |
| Warranty | 90 days |
Thank you so much for your attention .If you're interested in Used PHiliphh Goldway UT4000F Multi-Parameter Patient Bedside Monitor ,feel free to contact us .Thank you .
Product Tags:
|
|
10.4'' TFT display Used Patient Monitor PHiliph Goldway UT4000F Multi Parameter Patient Bedside Monitor Images
|
